Saskatoon Hot Tub
The Hot Tub is maintained at temperatures between 37 and 39 degrees Celsius. This temperature range is ideal for providing a relaxing soak in hot water while remaining safe.
Hot Tub Controls
JETS
Press Pump 1 key to turn Pump 1 on at low speed.
Press a second time to turn pump to high speed (with a dual-speed pump*). A third time turns pump off.
A built-in timer automatically turns pump off after 20 minutes, unless pump has been manually deactivated first.
The “Pump 1” indicator lights up when Pump 1 is on.
With a dual-speed pump, the indicator will flash when pump 1
is on at low speed.
Up/Down keys
Use Up or Down key to set desired water temperature.
The temperature setting will be displayed for 2 seconds to confirm your new selection.
The “Set Point” icon indicates that the display shows the desired temperature, NOT the current water temperature!
DO NOT SET ABOVE 39 Degrees Celsius.
Light key
Press Light key to turn light on.
A second press turns light off.
A built-in timer automatically turns light off after 2 hours,
unless it has been manually deactivated first.
The “Light” indicator lights up when light is on.
Chemical Guide
To protect your health, we ensure that your spa water is disinfected thoroughly between guests.
The use of Chlorine granules is the traditional method of disinfecting spas.
Chlorine granules dissolve quickly, without residues, and do not bleach the surfaces.
The granules are pH-neutral, i.e. the pH value of the water does not change with the dosing of the granules.
After treatment we wait 4hours until the water has experienced 'turnover' and has been cycled through the whole system.